Polaris Patriot 850 and 900 Dual Ring Direct Replacement Pistons

POLARIS 850 and 900 (DIRECT REPLACEMENT) PATRIOT DUAL RING PISTONS

NO HEAD REQUIRED!

NOTE: THIS IS FOR 2 PISTONS!

In TRUE RK TEK Fashion, we could not stand for a Single Ring Piston on a high HP 2 Stroke Snowmobile Engine. 

We did what we always do... Designed a CUSTOM DUAL RING PISTON for this engine. 

NOTE: For NEXT LEVEL Performance=-->  The 850 DROP IN kit AND the 900 DROP IN KIT!! LINK--> Polaris Patriot 850 and 900 Engine Performance Kits (2strokeheads.com)

 OR.. 850 to 900 Big Bore LINK-->Big Bore Kits: Patriot 900cc Big Bore (2strokeheads.com)   (BIG POWER)

_______________________________________________________________________________________

Polaris CFI Engine! Yes, these fit the new 850 and 900 Patriot Engine.
No "gimmicks" that claim to address the issues but really do nothing.

The RK Tek Line of Customs Pistons are VERY Unique... ALL pistons are designed from a blank sheet of paper and uses only the highest quality of components. We design the piston that should have been installed from the factory. We, usually, end up altering MANY of the OEM piston's design aspects and "correct" the short-comings we feel are present.

______________________________________________________________________________________________

The piston we use is VERY CUSTOM! We have been designing our own pistons since 2005.

These are the BEST pistons you can buy!!

__________________________________________________________________________________________________________________________________

NOTE: The RK Tek Line of Pistons are VERY different from any other production piston.

NOTE: This is VERY important...These pistons have a VERY unique design criteria. Y!

Less Stress = More longevity and more power!

We, REALLY, do address the OEM piston design issues with this kit.

No more "SLOPPY" OEM piston with poor piston geometry.

BEST PART: NO AFTERMARKET PIPE, Fuel controller, OR anything else is needed! We, purposely, designed this kit to perform using the components!

Once you have the kit installed.. YOU ARE DONE!!

Reliability is NOT compromised in any way, shape, or form and the cost is VERY affordable.

NO FUEL Controller required!!